Hey Guys,
I have the Raymarine Radome RD218, 2KW, 18".
I looking for a source for the o-ring style drive belt that is between the motor and the array within the dome.
Raymarine no longer carries it and were not able to provide me the belt dimensions.
Thanks,
Bill Williams
Atlanta, GA
#193
Raymarine Radar
Moderator: KenKrawford
-
- Posts: 208
- Joined: Mon Mar 05, 2012 7:32 pm
Re: Raymarine Radar
Bill,
I have a complete Pathfinder 18" Radome with the mast mount in the basement. This might be the same as you need. If you need it for spare parts it is available.
Location is South Jersey but would take it to the boat in Georgetown Md. for pickup. It also could be shipped, but might be expensive.
I don't know if it works.
I have a complete Pathfinder 18" Radome with the mast mount in the basement. This might be the same as you need. If you need it for spare parts it is available.
Location is South Jersey but would take it to the boat in Georgetown Md. for pickup. It also could be shipped, but might be expensive.
I don't know if it works.
Leigh and Donna Weiss
Brisa #155
Georgetown, MD. USA
Brisa #155
Georgetown, MD. USA
-
- Posts: 108
- Joined: Wed Nov 02, 2016 5:43 pm
Re: Raymarine Radar
Hi Leigh,
Thanks for the reply!
I'm hoping I can find someone who has a spare belt, or is just "parting" out an old unit.
There are a lot of these units listed on eBay, but with the cost of the dome and shipping, they would be several hundred dollars.
If you decide to part yours out, please let me know.
Thanks,
Bill
Atlanta, GA
Thanks for the reply!
I'm hoping I can find someone who has a spare belt, or is just "parting" out an old unit.
There are a lot of these units listed on eBay, but with the cost of the dome and shipping, they would be several hundred dollars.
If you decide to part yours out, please let me know.
Thanks,
Bill
Atlanta, GA