We are having a hard time sliding the cockpit hatch cover. Tried a couple of things. Door-ease (kind of a wax) and sail-kote. Neither worked. Any suggestions?
Steve
Sliding hatch cover
Moderator: KenKrawford
-
sgoldman
- Posts: 32
- Joined: Sat Feb 27, 2021 12:12 am
Sliding hatch cover
Last edited by sgoldman on Wed Jul 03, 2024 10:56 pm, edited 1 time in total.
Steve Goldman
"Peen honin"
Catalina C350 Hull 485
Waukegan, IL.
"Peen honin"
Catalina C350 Hull 485
Waukegan, IL.
-
wolfe10
- Posts: 633
- Joined: Mon Dec 11, 2006 2:58 pm
- Location: Ft Myers Florida
Re: Sliding hatch cover
Steve,
Where is it binding?
A picture would help.
Where is it binding?
A picture would help.
Brett Wolfe
C350 #180
"Vindaloo"
Ft Myers FL
C350 #180
"Vindaloo"
Ft Myers FL
-
cuthbert
- Posts: 110
- Joined: Fri Apr 27, 2012 1:20 pm
Re: Sliding hatch cover
Under “general discussions” there is a thread “companionway hatch cover rotting”
I would advise to take the cover off and check underneath
I would advise to take the cover off and check underneath
-
sgoldman
- Posts: 32
- Joined: Sat Feb 27, 2021 12:12 am
Re: Sliding hatch cover
I took the screws around the hatch cover (not all of them-6), lifted it up by placing screw drivers under the cover to hold it up and cleaned it real well (with a steam cleaner). Seems to slides better. Still need to improve it. No obvious binding points.
Steve Goldman
"Peen honin"
Catalina C350 Hull 485
Waukegan, IL.
"Peen honin"
Catalina C350 Hull 485
Waukegan, IL.