Deck Fills

Post your technical questions or solutions about your boat's plumbing here.

Moderator: KenKrawford

Post Reply
User avatar
william vanwagoner
Posts: 112
Joined: Wed Nov 02, 2005 8:59 pm
Location: Destiny #229 Long Beach CA

Deck Fills

Post by william vanwagoner »

Does anyone know for sure who the manufacturer is for the beautiful stainless steel deck fills on the C350 Mark 1? The o-rings on mine need to be replaced and I was hoping to get an exact match. I have seen very similar looking products from Whitecap and Gem Products for example.
Bill VanWagoner
Destiny #229
R.B.
Posts: 233
Joined: Fri Jan 20, 2006 2:04 pm
Location: Ontario, Canada

Re: Deck Fills

Post by R.B. »

From another thread it was suggested that Gem is the manufacturer (http://www.catalina350.net/phpBB3/viewt ... f=15&t=613) I have used o-rings from the local hardware store without issue.
Ralph

WOLFHELM
C350 #342
Fat Cat

Re: Deck Fills

Post by Fat Cat »

We also replaced all the O rings on the fuel fill, water fills, and pump out with rings bought at our local boat yard. Just take an old one with you and it's easy to find a match. I think you really want to make sure that the fuel fill O ring is in good condition.

Fat Cat
#258
Post Reply