It looks like prices have increased, I swear I paid about 30 bucks a piece. Austral Marine now has it listed for 120. There are a few other place that see in the internet below 100.
Good luck, let me know if you need anything else.
Search found 42 matches
- Sat Jun 10, 2023 10:29 am
- Forum: Engine / Transmission Forum
- Topic: Lift Pump - Kubota Part Number?
- Replies: 8
- Views: 861
- Sat Jun 10, 2023 10:21 am
- Forum: Engine / Transmission Forum
- Topic: Lift Pump - Kubota Part Number?
- Replies: 8
- Views: 861
Re: Lift Pump - Kubota Part Number?
Bill, I can’t seem to get the photo to load. File too big. The lift pump i used is Kohler p/n 249862. My lift pump died 3 years ago and have been using this one since then with no problems. I bought a spare and keep it on board. Austral Marine International - local shop in Miami, had the cross-refer...
- Wed Jun 07, 2023 4:10 pm
- Forum: Engine / Transmission Forum
- Topic: Lift Pump - Kubota Part Number?
- Replies: 8
- Views: 861
Re: Lift Pump - Kubota Part Number?
Bill, just seeing this now. I have the kubota lift pump. Actually I think kohler is the brand. I will get the on from my boat, but probably not until the weekend. A place called Austral Marine in Miami gave me the cross reference. You could call them at 305-633-0732. I recall it was obscenely less e...
- Tue Sep 20, 2022 3:57 pm
- Forum: Plumbing Forum
- Topic: Galley Seacock
- Replies: 4
- Views: 612
Re: Galley Seacock
Spelling auto correct is not my friend today…. And I have fat thumbs typing on my little phone!
- Tue Sep 20, 2022 3:56 pm
- Forum: Plumbing Forum
- Topic: Galley Seacock
- Replies: 4
- Views: 612
Re: Galley Seacock
Thanks for the reply Ken. My seacock does not have the little plug that seems to accompany the newer versions of the same. I see some videos using that plug, but just don’t have it on, what I assume to be the original seacock that came with the boat in 2003. I am trying to reach Forespar tech suppor...
- Tue Sep 20, 2022 3:55 pm
- Forum: Plumbing Forum
- Topic: Galley Seacock
- Replies: 4
- Views: 612
Re: Galley Seacock
Thanks for the reply Ken. My seasick does not have the little plug that seems to accompany the newer versions of the same. I see some videos using that plug, but just don’t have it on, what I assume to be the original seacock that came with the boat in 2003. I am trying to reach forespar tech suppor...
- Mon Sep 19, 2022 4:44 pm
- Forum: Head Forum
- Topic: Flush water swirls but wont leave the bowl
- Replies: 7
- Views: 1132
Re: Flush water swirls but wont leave the bowl
Hi, There are a lot of good responses here. I had a similar issue, but I frustratingly found that I simply had a bad joker valve and installed a bad new joker valve (twice). Well, I think I had a bad "new" joker valve once (Raritan), then tried a Jabsco that jus would not seat properly. Te...
- Mon Sep 19, 2022 4:02 pm
- Forum: Plumbing Forum
- Topic: Galley Seacock
- Replies: 4
- Views: 612
Galley Seacock
Hi everyone, I have just noticed a leak in the handle of my galley sink seacock. I ordered the o-rings and gaskets from Catalina Direct as follows: Seacock Emergency Repair Kit 1-1/2" And 2" (#Z5108): 2 Item Total: $11.90 It should probably just be the o-rings, but thought I would replace ...
- Sat Aug 27, 2022 9:22 pm
- Forum: Air Conditioning Forum
- Topic: AC runs, no error message, but takes a rest for a while, and then works again
- Replies: 3
- Views: 859
Re: AC runs, no error message, but takes a rest for a while, and then works again
Thanks for the input. Flow was not really bad, but used barnacle buster and the flow is really good now. A noticeable difference.. Unfortunately, it still has a little pause. It was too dark by time I finished to really see if there was a change in flow. I bet there is no change in flow. The AC is c...
- Fri Aug 26, 2022 3:03 pm
- Forum: Air Conditioning Forum
- Topic: AC runs, no error message, but takes a rest for a while, and then works again
- Replies: 3
- Views: 859
AC runs, no error message, but takes a rest for a while, and then works again
Hi everyone, My AC works and cools, but runs for a while then stops (water pump still running), like it needs a rest, and kicks back on. No error messages. Some boat neighbors suggested that I should clean the lines with barnacle buster stating that maybe there is poor flow and the compressor is ove...
- Fri Jun 24, 2022 5:07 pm
- Forum: Engine / Transmission Forum
- Topic: M35B Engine Overhaul?
- Replies: 3
- Views: 825
Re: M35B Engine Overhaul?
Bob, I am in the same boat (almost literally). I agree with Wolfe10, these diesel engines can and do live forever. Just do the maintenance and keep it from rusting away. Keep it clean, cooled, feed it clean diesel and keep it well lubricated, and of course drive her with respect she will keep tick, ...
- Mon Jun 06, 2022 3:29 pm
- Forum: Refrigerator Forum
- Topic: Fridge Compressor -Replacement
- Replies: 9
- Views: 1304
Re: Fridge Compressor -Replacement
Hi, With respect to the thermostat, I found a replacement part number F1710JR680 at AMC Cliffvs Marine. Only place I could find. It was crazy expensive, but replaced thermostat, telephone jack type wiring and thermocouple wire. It was plug an play, except I had to rebuild the phone jack plug at the ...
- Tue Mar 02, 2021 12:42 pm
- Forum: Engine / Transmission Forum
- Topic: Panda Fisher 4200 - Valve clearance adjustment
- Replies: 4
- Views: 1813
Re: Panda Fisher 4200 - Valve clearance adjustment
Hi all, It’s been awhile since I have been on the forum. Update on my Panda Genset. Three month project. Knock on wood problem solved after some twists and turns. The valve clearance/lash kept tightening on the exhaust side. Had to adjust valve lash every 2nd or 3rd use. I even tried red Loctite. Pu...
- Sun Dec 20, 2020 5:11 pm
- Forum: Scuttlebutt
- Topic: Catalina Factory Damaged By Tornado
- Replies: 1
- Views: 909
Re: Catalina Factory Damaged By Tornado
Oh My! I had not heard and I am in South Florida. I just saw some videos and that is terrible- an EF 2 300 yards wide and lots of homes destroyed. I only have spoken the Gerry at Catalina in the past, but hope he is okay as well as others at Catalina and in the area. NormSail350 #41 Escape. Palmetto...
- Sat Dec 19, 2020 11:39 am
- Forum: Hull, Prop, and Rudder Forum
- Topic: Patch in bilge
- Replies: 1
- Views: 796
Re: Patch in bilge
Sorry picture not attaching - says too large.
- Sat Dec 19, 2020 11:34 am
- Forum: Hull, Prop, and Rudder Forum
- Topic: Patch in bilge
- Replies: 1
- Views: 796
Patch in bilge
Hi all, I have a plastic patch in the botttom of the bilge. It is thin piece of plastic. It was sitting under a bilge bump. It is thin so not a backing plate to screw in the pump. I have not pulled it up. See picture attached. Is this something original? Anyone have this? I am trying to solve a leak...
- Tue Dec 08, 2020 5:16 pm
- Forum: Engine / Transmission Forum
- Topic: Engine throttle and shift control cables
- Replies: 12
- Views: 3190
Re: Engine throttle and shift control cables
Bill, Just received a picture of the old shift cable from the marina, but not able to attach the picture. Shift cable is 13 ft. Old Cable shift cable has following markings OLIRAFLEX USA CO FT13 182 I will have to go to the boat and see if the throttle cable has markings but later this week or weeke...
- Tue Dec 08, 2020 4:59 pm
- Forum: Engine / Transmission Forum
- Topic: Engine throttle and shift control cables
- Replies: 12
- Views: 3190
Re: Engine throttle and shift control cables
Bill,
I have a question out to the marina that did mine, but no response yet.
NormSail350
Escape #41
Palmetto Bay, FL
I have a question out to the marina that did mine, but no response yet.
NormSail350
Escape #41
Palmetto Bay, FL
- Sat Dec 05, 2020 11:24 am
- Forum: Engine / Transmission Forum
- Topic: Engine throttle and shift control cables
- Replies: 12
- Views: 3190
Re: Engine throttle and shift control cables
Bill,
Used 3300 TFXTreme cable. I do not have the size. I would guess that it was cut and fit to size. Total costs 53.34 for cable.
I wil ask the marina if they have the length. I was charged two hours of labor at $85/per hour.
NormSail350
Escape #41
Palmetto Bay, FL
Used 3300 TFXTreme cable. I do not have the size. I would guess that it was cut and fit to size. Total costs 53.34 for cable.
I wil ask the marina if they have the length. I was charged two hours of labor at $85/per hour.
NormSail350
Escape #41
Palmetto Bay, FL
- Thu Dec 03, 2020 1:03 pm
- Forum: Engine / Transmission Forum
- Topic: Engine throttle and shift control cables
- Replies: 12
- Views: 3190
Re: Engine throttle and shift control cables
HI all, Just an update. I replaced the shift cable and now it shifts like butter. Once the old cable was out, it was easy to see the cracks and wear. The wear was not so obvious while they were in place. I had a marina do it along with a long list of other items - including the exhaust riser. I also...