Search found 5 matches
- Sun Aug 21, 2022 11:38 am
- Forum: Electrical and Electronics Forum
- Topic: Engine Guages and Tach for M35B
- Replies: 11
- Views: 2801
Re: Engine Guages and Tach for M35B
Just thought I would post some pictures on the location of this circuit breaker. It tripped on me last week the engine stalled as well. I couldn't restart the engine since there was no voltage to the instrument panel. The service manual remedy is "reset breaker, if opens again check preheat sol...
- Wed Jun 02, 2021 5:44 am
- Forum: Rigging Forum
- Topic: Traveler and Genoa Furling Line
- Replies: 9
- Views: 2119
Re: Traveler and Genoa Furling Line
Ken - thank you for those pictures, I may give that a try. Final question, do you have any problems with the furling line crossing the genoa sheet when the genoa is reefed (both lines under tension)?
- Fri May 28, 2021 6:34 am
- Forum: Rigging Forum
- Topic: Traveler and Genoa Furling Line
- Replies: 9
- Views: 2119
Re: Traveler and Genoa Furling Line
Ken - I didn't realize how often I step on the furling line on the coach roof until you pointed it out. When I called Catalina Direct and spoke to its technical guy about replacing the sheave he was surprised to hear that the line went through the deck organizer. I know this was factory installed bu...
- Sat May 22, 2021 8:15 am
- Forum: Rigging Forum
- Topic: Traveler and Genoa Furling Line
- Replies: 9
- Views: 2119
Traveler and Genoa Furling Line
My genoa furling line (3/8" thickness) is now very tight and does not move freely through the outermost sheave on the line organizer under the traveler. It actually stuck once trying to furl in the genoa and now is just very tight. I spoke to Garhauer about this problem and they did not have a ...
- Sun Feb 10, 2019 12:28 pm
- Forum: Add-ons and Improvements
- Topic: Sirius XM InstallXM Install
- Replies: 9
- Views: 5051
Re: Sirius XM InstallXM Install
Ed, I have Sirius and had the antenna installed on the port aft rail. A hole was drilled at the base of the rail as you can see in the photo. I later added solar panels and ran the wiring through this hole as well. The installer used a Blue Sea Cable Clam to keep it water tight. The tape you see in ...