When we purchased Serendipity the original shower hose was bad. We took the hose to Lowes, got the adaptor fitting and a new handheld shower for about $15.00.
Good Luck
Search found 16 matches
- Sat Apr 15, 2017 10:54 pm
- Forum: Plumbing Forum
- Topic: catalina 350 shower
- Replies: 10
- Views: 10669
- Sat Mar 18, 2017 9:41 am
- Forum: Rigging Forum
- Topic: Genoa Furling Line Specs
- Replies: 25
- Views: 11429
Re: Genoa Furling Line Specs
No problem Dave.
Anything to help the boat fund.
Anything to help the boat fund.
- Thu Mar 16, 2017 8:18 pm
- Forum: Rigging Forum
- Topic: Genoa Furling Line Specs
- Replies: 25
- Views: 11429
Re: Genoa Furling Line Specs
Here are the sizes and lengths of line we used. We arrived at this through the Catalina 350 manual the Genoa and Mainsail furling manuals, calling Catalina, talking with another 350 owner on our dock, And taking measurements on the boat (without going up the mast) and when totally unsure, flipping m...
- Wed Mar 15, 2017 8:52 am
- Forum: Rigging Forum
- Topic: Genoa Furling Line Specs
- Replies: 25
- Views: 11429
Re: Genoa Furling Line Specs
We just replaced all the running rigging on Serendipity. We used 75 ft. of 7/16 for the furling line. We used the 70 ft. recommendation and I added 5 feet to it just in case. We did a lot of research to come up with the lengths and sizes we needed and still had some lengths longer than needed. Bart,...
- Tue Nov 08, 2016 11:23 am
- Forum: Add-ons and Improvements
- Topic: Outland Hatch Covers
- Replies: 5
- Views: 10359
Re: Outland Hatch Covers
We added them to Serendipity in April 2015. Have had no issues at all. The installation was easy and they looked good when we finished. We had the Boats name put on the forward hatch so anyone visiting can find our boat when we are pulled into a slip. We periodically remove them for cleaning and the...
- Tue Feb 23, 2016 10:21 pm
- Forum: Electrical and Electronics Forum
- Topic: Engine Gauge Panel Replacement
- Replies: 2
- Views: 4014
Re: Engine Gauge Panel Replacement
Ken,
You will need to contact Martek in Clearwater. I sent the entire panel to them and they made a template so there will be a price difference as it should be easier to make the replacement panel now. I will attempt to post a picture soon.
Bart
You will need to contact Martek in Clearwater. I sent the entire panel to them and they made a template so there will be a price difference as it should be easier to make the replacement panel now. I will attempt to post a picture soon.
Bart
- Tue Feb 23, 2016 12:04 am
- Forum: Electrical and Electronics Forum
- Topic: Engine Gauge Panel Replacement
- Replies: 2
- Views: 4014
Engine Gauge Panel Replacement
If you are looking for a replacement panel for your gauges contact Kevin at Martek Davits in Clearwater Fl. We recently bought davits from Martek for Serendipity. We went over to see the shop and pick up the davits. While we were there we saw panels with gauges and it turned out Kevin also makes the...
- Sun Mar 01, 2015 10:27 am
- Forum: Refrigerator Forum
- Topic: Second Refrigeration System
- Replies: 8
- Views: 7462
Re: Second Refrigeration System
Thank you all.
There is definitely much food for thought here. Once we get through with our haul out later this month we will attack the refrigeration among the other projects.
Bart, Trish and Sailor the boat dog
S/V Serendipity
There is definitely much food for thought here. Once we get through with our haul out later this month we will attack the refrigeration among the other projects.
Bart, Trish and Sailor the boat dog
S/V Serendipity
- Sat Feb 28, 2015 10:49 am
- Forum: Hull, Prop, and Rudder Forum
- Topic: Haul out Advice
- Replies: 5
- Views: 5571
Re: Haul out Advice
Thank you
Any and all advice is appreciated. Looking into if we need to replace the shaft. Going to pick up copper coat and Martek davits this coming week. Will pull Serendipity week of March 16 and get her ready to go. Also ordered a feathering prop.
Any and all advice is appreciated. Looking into if we need to replace the shaft. Going to pick up copper coat and Martek davits this coming week. Will pull Serendipity week of March 16 and get her ready to go. Also ordered a feathering prop.
- Sun Feb 22, 2015 11:21 am
- Forum: Refrigerator Forum
- Topic: Second Refrigeration System
- Replies: 8
- Views: 7462
Re: Second Refrigeration System
Thank you Ken.
How much insulation did you add and was it on the inside of the box, outside or both.
Bart,Trish and Sailor
How much insulation did you add and was it on the inside of the box, outside or both.
Bart,Trish and Sailor
- Sun Feb 22, 2015 12:11 am
- Forum: Hull, Prop, and Rudder Forum
- Topic: Haul out Advice
- Replies: 5
- Views: 5571
Haul out Advice
Hello all. Have a few questions prior to our hauling Serendipity for maintenance and bottom paint. Anyone have any experience with Copper Coat bottom paint? Opinions on feathering props. Has anyone had any success with replacing the cutlass bearing without dropping the rudder or raising the engine? ...
- Sat Feb 21, 2015 11:51 pm
- Forum: Refrigerator Forum
- Topic: Second Refrigeration System
- Replies: 8
- Views: 7462
Second Refrigeration System
Hello All
In discussing our refrigeration concerns with several venders at the recent Miami Show one interesting suggestion came up. Seal the fridge from the freezer and add a second refrigeration unit. Has anyone thought or tried this.
Thank you
Bart Trish and Sailor the boat dog
S/V Serendipity
In discussing our refrigeration concerns with several venders at the recent Miami Show one interesting suggestion came up. Seal the fridge from the freezer and add a second refrigeration unit. Has anyone thought or tried this.
Thank you
Bart Trish and Sailor the boat dog
S/V Serendipity
- Mon Oct 20, 2014 11:19 pm
- Forum: Add-ons and Improvements
- Topic: Shin Saver
- Replies: 2
- Views: 5093
Re: Shin Saver
Installed the shin saver on Serendipity. Not only has it saved our shins but today our new dog we rescued tried to jump out into the cockpit and slid over the threshold without injury. :D One of many improvements we will be making using what we learned at the recent rendezvous. Bart and Trish S/V Se...
- Tue Sep 16, 2014 3:25 pm
- Forum: Scuttlebutt
- Topic: Florida Catalina 350 Roundup
- Replies: 10
- Views: 8609
Re: Florida Catalina 350 Roundup
Thank you Arkeoo. Looking forward to meeting everyone
- Tue Sep 16, 2014 3:07 pm
- Forum: Scuttlebutt
- Topic: Florida Catalina 350 Roundup
- Replies: 10
- Views: 8609
Re: Florida Catalina 350 Roundup
Hello AussieMate, We would love to meet and visit, but unforunately we are out of town till the weekend assisting a friend in the Fl Keys. {I know it is rough}. We will look forward to meeting you and all the other 350 owners in Tampa. Halifax Marina is a good stop. Clean and with after hour secutit...
- Sun Sep 14, 2014 2:03 pm
- Forum: Scuttlebutt
- Topic: Florida Catalina 350 Roundup
- Replies: 10
- Views: 8609
Re: Florida Catalina 350 Roundup
Hello Bart and Trish here making our first post. We just purchased Hull #122 and moved her to Daytona and are in the process of renaming her Serendipity. We are looking forward to attending the roundup and learning from other Catalina 350 owners as well as sharing experiences. We will see all in Oct...